Anheuser-Busch Brewing Ass'n v. United States
207 U.S. 556 (1908)

Annotate this Case

U.S. Supreme Court

Anheuser-Busch Brewing Ass'n v. United States, 207 U.S. 556 (1908)

Anheuser-Busch Brewing Association v. United States

No. 60

Argued December 9, 1907

Decided January 6, 1908

207 U.S. 556

APPEAL FROM THE COURT OF CLAIMS

Syllabus

To entitle a manufacturer to drawbacks under § 25 of the Tariff Act of October 1, 1890, 26 Stat. 567, 617, on imported raw material used in the manufacture or production of article in the United States, there must be some transformation, so that a new and different article emerges having a distinctive name, character, and use. The mere subjection of imported article, such a cork, to a cleaning and coating process to adapt them to a special use does not amount to manufacturing them within the meaning of the statute, and the exporter is not entitled to drawback thereon. Jos. Schlitz Brewing Co. v. United States,181 U. S. 584. Semble: an exportation of bottled beer is an exportation of the beer, and not of the cork in the bottle, and therefore such cork are not exported article within the meaning of § 25 of the Tariff Act of October 1, 1890.

41 Ct.Cl. 389, affirmed.

The facts are stated in the opinion.

Page 207 U. S. 558

MR. JUSTICE McKENNA delivered the opinion of the Court.

This is an action for $27,000 for drawbacks on corks imported from Spain and used by claimant in bottling its beer, and entered for the benefit of drawback upon exportation under § 25 of the act of Congress entitled "An Act to Reduce the Revenue and Equalize Duties on Imports and for Other Purposes,"

Page 207 U. S. 559

approved October 1, 1890. The section reads as follows:

"That where imported materials on which duties have been paid are used in the manufacture of articles manufactured or produced in the United States, there shall be allowed on the exportation of such articles a drawback equal in amount to the duties paid on the materials used, less one percentum of such duties. Provided, that when the articles exported are made in part from domestic materials, the imported materials, or the parts of the articles made from such materials, shall so appear in the completed articles that the quantity or measure thereof may be ascertained. And provided further, that the drawback on any article allowed under existing law shall be continued at the rate herein provided. That the imported materials used in the manufacture or production of articles entitled to drawback of custom duties when exported shall, in all cases where drawback of duties paid on such materials is claimed, be identified, the quantity of such materials used and the amount of duties paid thereon shall be ascertained, the facts of the manufacture or production of such articles in the United States and their exportation therefrom shall be determined, and the drawback due thereon shall be paid to the manufacturer, producer, or exporter, to the agent of either, or to the person to whom such manufacturer, producer, exporter, or agent shall in writing order such drawback paid, under such regulations as the Secretary of the Treasury shall prescribe."

The corks in question were, after their importation, subject to a special treatment which, it is contended, caused them to be articles manufactured in the United States of "imported materials" within the meaning of § 25. The Court of Claims decided against the contention and dismissed the petition. 41 Ct.Cl. 389.

The treatment to which the corks were subjected is detailed in finding III, inserted in the margin. *

Page 207 U. S. 560

In opposition to the judgment of the Court of Claims, counsel have submitted many definitions of "manufacture," both

Page 207 U. S. 561

as a noun and a verb, which, however applicable to the cases in which they were used, would be, we think, extended too far

Page 207 U. S. 562

if made to cover the treatment detailed in finding 3 or to the corks after the treatment. The words of the statute are indeed so familiar in use and of meaning that they are confused by attempts at definition. Their first sense as used is fabrication or composition -- a new article is produced of which the imported material constitutes an ingredient or part. When we go further than this in explanation, we are involved in refinements and in impracticable niceties. Manufacture implies a change, but every change is not manufacture, and yet every change in an article is the result of treatment, labor, and manipulation. But something more is necessary, as set forth and illustrated in Hartranft v. Wiegmann,121 U. S. 609. There must be transformation; a new and different article must emerge, "having a distinctive name, character, or use." This cannot be said of the corks in question. A cork put through the claimant's process is still a cork. The process is the preparation of the encasement of the beer, and assimilates this case to Joseph Schlitz Brewing Co. v. United States,181 U. S. 584. There, it was contended that bottles and corks in which beer is bottled and exported were "imported materials used in the manufacture"

Page 207 U. S. 563

of such beer within the meaning of § 25. And it was pointed out -- found by the Court of Claims -- that the process of manufacturing beer for exportation was different from the process of manufacturing beer for domestic use, and the materials selected with greater care, in order that the bottled product might preserve purity under the conditions of transportation and change of climate. The process was detailed at length. It was decided, however, that such special process and treatment did not make the bottles and corks component parts of the beer when exported, as it was insisted they were. It is true that it was not contended in that case, as it is in this, that the corks or the bottles were articles manufactured in the United States of imported materials by reason of the special treatment to which they had been subjected, making them better or necessary for their purpose. That such a contention was possible under the statute did not occur to the brewing company. It does not appear in the statement of the case that the corks were subjected to any treatment, and appellant denies the application of the case by saying that "the corks were not put through any process of manufacture whatever." And yet it must have been necessary then, as the Court of Claims has found it to be, that, "without the careful selection and thorough treatment of corks, beer cannot with safety be exported from the United States to foreign countries." Of course, the views of a litigant of his rights under a statute are not an absolute test of the views of a litigant in another case, but the Schlitz Brewing case was one which may be supposed to have brought to consideration every practicable and legal problem under the statute, and if a cork by special treatment ceases to be a cork and becomes an article manufactured of cork, he change and the legal effect of it would have thrust themselves upon the notice of somebody. But passing this, there is force in the contention of the United States that the exportations were not of corks or bottles, but of beer, and therefore not articles exported within the meaning of § 25, entitled to a drawback. This phase of the case -- indeed all

Page 207 U. S. 564

phases of it -- is ably dealt with in the opinion of the Court of Claims, and it would be unnecessary repetition to go over the argument or to review the cases.

Judgment affirmed.

*

"III. That while said acts of October 1, 1890, and August 27, 1894, and July 24, 1897, were in force and operation, the claimant herein, being engaged in the regular, ordinary, and usual course of its business aforesaid, exported from the United States a large quantity of beer brewed and manufactured by it, which exportation thereof was in bottles duly corked by it with corks so as to preserve the beer; that such corks so used by it in the bottles in which such beer was exported were imported from Spain, a foreign country (and on which corks duty had been paid to the United States, according to law at the rate of 15 cents per pound, under the provisions of paragraph 416 of the Act of Congress approved July 24, 1897), they being corks over three-fourths of an inch in diameter, measured at the larger end. The corks so imported from Spain were subjected to treatment by claimant."

"The corks so used by the claimant in the making and shipment of its export beer were corks imported into this country from Spain, where they were cut by hand, without steaming. After these corks were received by claimant in its brewery in St. Louis, and while in the same state in which they were imported from Spain, they were carefully examined and all that were not fit for use in the export trade were rejected. The good ones were then selected and assorted according to sizes, and were branded with the date, the name of the brewer, the name of the beer, and a special private mark to show what firm the cork came from. All this was done by unskilled labor."

"The selected corks were put into a machine, or air fan, the unpatented invention of a man in the employ of the claimant, and all dust, meal, bugs, and worms were removed therefrom. They were then thoroughly cleansed by washing and steaming, removing the tannin and germs and making the cork soft and elastic, and they were next exposed to blasts of air in a machine, the unpatented invention of the same employee, until they were absolutely dry."

"Following this, they were put for a few seconds into a bath of glycerin and alcohol, the proportions of which are a trade secret which the claimant has the right to use, and then they were dried by a special system. This bath closed up all the seams, holes, and crevices, and gave the corks a coating which prevented the beer from acquiring a cork taste. The corks were then dried by absorption of the chemicals that had covered them. If the corks had been used without the application of this chemical bath, the beer would have acquired a taste of cork, which would have injured the market for it."

"The whole process took from one day to three days, the longest part of it being the drying after the chemical bath."

"The bath made it easier to put the cork into the bottle and take it out. The pores and apertures of the cork were thoroughly closed by the bath, and thus the escape of the gases contained in the beer was prevented."

"The steaming of the corks, or pasteurizing them, destroyed all the germs in them that would damage or spoil the beer if they were not pasteurized. This pasteurizing also destroyed the yeast that might have been in the beer."

"If the corks had but little or no elasticity, and did not fit the bottles perfectly, the gas would escape while the beer was yet in the brewery, or in transportation, or in the place of market, and the beer would be flat, stale, worthless, and unmarketable."

"When the corks had been dried, they were soft, elastic, and pliable, free from all foreign substances and germs, perfectly air-tight, and fitted for use in bottling beer for export. They were next taken to the building in claimant's brewery which was used for bottling purposes, where they were again soaked or wetted by steaming them for a short time, so they would fit snugly and easily in the bottles."

"The bathing, or treatment by the bath, and the washing and steaming of the corks, were all done by skilled labor."

"After the beer had been put in the bottles and they had been corked, the filled bottles were put in a large vat, where they were pasteurized by heating to the right temperature for a sufficient length of time and cooled again. If the corks had not been treated as above described, the carbonic acid gas would have escaped in the heating or pasteurizing process, because there was a powerful gas pressure toward the cork during all that process. If that gas had escaped, the beer would have become flat."

"The corks, so treated by this process and put in the bottles of beer, could only be removed therefrom by means of a corkscrew or other instrument of force, which removal would damage or destroy the cork so it could not be used afterwards for the same purpose."

"The hand-cut corks which come from Spain have all been cut out of the wood without steaming it beforehand. The corks that are cut in the United States are cut from the wood that has been steamed first, thus depriving them of much of their elasticity. Because the Spanish hand-cut corks are cut without having been steamed in the first instance, they are far safer and better corks to be made for and used in bottling export beer than corks cut in the United States after being steamed."

"Without the careful selection and thorough treatment of corks, beer cannot with safety be exported from the United States to foreign countries."

"When the corkwood reaches the United States, it is steamed in order to get an increase volume out of it. The steaming of the corkwood makes it open something like a sponge. The steaming swells the cork, and those who do the steaming get more corks out of it, but how much more does not appear. But the steaming takes away its elasticity, and the cork cut after steaming is not so good or so perfect as one cut from the dry wood in the first place."

"Corks cut after steaming will shrink, and that fact makes them inferior corks. Cork dealers in the United States also put it through various treatments, such as polishing it and using chemicals to make it look bright and have a good color. They do not attempt to close up the pores in the cork, nor run it through machinery to shake or wash the dust or impurities out of it. They put the cork on the market as the machine cuts it after it has been steamed. Corks so cut and treated in the United States would not be fit for use in the exportation of beer, for they would damage the beer through contact, and much stale beer would result from the escape of the carbonic acid gas by reason of the imperfect corking, and the beer would not be marketable."

"In the manufacture of beer for export to other countries, it was necessary to destroy the yeast in the beer to prevent second fermentation and the consequent ruin of the beer. In order to destroy the germs of yeast, the finished beer was steamed to the degree necessary to destroy the germs, and for that purpose, the beer was enclosed securely in a vessel to prevent the escape of the carbonic acid gas, and of all such vessels, a bottle made of glass was and is the one best adapted to the purpose aforesaid. And such steaming was also necessary to the perfect manufacture of beer for bottling, and to the perfect corking thereof it was essential and necessary that the cork as treated should be used as herein described."

Official Supreme Court caselaw is only found in the print version of the United States Reports. Justia caselaw is provided for general informational purposes only, and may not reflect current legal developments, verdicts or settlements. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or information linked to from this site. Please check official sources.